Freelander - Sunglasses Holder
Fitting Sunglasses Holder STC50086
Tools needed: 1 flat head screwdriver, 1 Phillips head screwdriver
This is a generic fit part for Discovery, Freelander and Range Rover, and includes parts and fitting instructions for all models.
 |
Use a flat head screwdriver to lever off the blanking plates over the driver's door. |
 |
Exposing the holes to fit the sunglasses holder to. |
 |
Insert the clips into the holes, so that the hole in the clip lines up with the hole in the body that has a screw thread. |
 |
The new clips should look like this with the holes inner most. |
 |
Open the sunglasses holder and using the steel coloured screws attach the Sunglasses holder as shown, the screw go through the holes in the clips into the body. |
 |
Fitted and complete. Total fit time 5 minutes.
|
