Freelander - Plenum Cover Loose
SEAL - PLENUM COVER TO WINDSCREEN - ADRIFT FROM PLENUM COVER
Bulletin Number - 0073
Issue - 1
Date - 04.07.2001
Model - Freelander
Affected Range - All derivatives in VIN range 1A 315400 to 1A 336686
Re-Issue Information
Problem -
SEAL - PLENUM COVER TO WINDSCREEN - ADRIFT FROM PLENUM COVER
The customer complains of the untidy appearance of the plenum cover to windscreen seal.
Cause
Poor adhesion of the seal to the plenum cover.
Action
On customer complaint of the above, secure the section of the seal which is displaced to the plenum cover, using the cleaning and adhesive materials detailed in PARTS INFORMATION.
Apply the adhesive sparingly to ensure that no excess is squeezed out when the seal is refitted.
Parts Information
CKU000020K - Adhesive Kit - containing adhesive, mixer unit and spirit wipe
NOTE: The adhesive is applied using the reusable applicator gun supplied in Adhesive Kit CKU000010K.
Dealers should already be in possession of this item following its use in Service Action A/D388 - Freelander Taildoor Glass.
It should therefore not be necessary to reorder CKU000010K.
Warranty
Use Complaint Code: 9M4B
Use S.R.O.: 80.15.89/51
Time allowance: 0.10Hrs
